Description
The WA2022 is a Ruger 10/22 replacement mod designed around the super rare Walther WA 2000. Bring out your 1980’s style in .22 caliber!
This is a hardware kit only! It does not include any 10-22 parts. It is highly recommended to either convert an existing 10-22 into this build, or buy a parts kit from gunbroker/everygunpart/etc. The following 10-22 parts are required to complete this build, and NOT included in this kit:
| 10-22 Parts Needed |
| Bolt |
| Charging Handle |
| Guide Rod |
| Guide Rod Spring |
| Mag Latch |
| Mag Plunger |
| Mag Plunger Spring |
| Trigger Pack |
| Barrel (or printed barrel + Liner) |
| Barrel Retainer Block (printable option included in files) |
Hardware that is included in this kit:
| Exact Part | Count | Link |
| 1/4″-20 Threaded Rod – 300mm | 2 | https://amzn.to/4d4Ey74 |
| 1/4″-20 Flange Nut | 2 | https://amzn.to/3RV8skG |
| 1/4″-20 Barrel Cap | 2 | https://www.mcmaster.com/90835A666/ |
| M4 x 8 Heat Set | 3 | https://amzn.to/3SuiU2w |
| M4 x 6 Heat Set | 2 | https://amzn.to/4iRVIWT |
| M4 x 4 Heat Set | 3 | https://amzn.to/4kcL4LE |
| M3 x 4 Heat Set | 6 | https://amzn.to/3YyprwT |
| 1/4″ x 1.5″ Steel Pin | 1 | https://amzn.to/3GDUlhh |
| M4 x 16mm Bolt | 4 | https://amzn.to/43hJiD4 |
| M4 x 25mm Bolt | 11 | https://amzn.to/4iTleuO |
| M4 Nut | 8 | https://amzn.to/439tp0h |
| M4 x 10mm Bolt | 1 | https://amzn.to/4dgFdmc |
| M4 x 12mm Bolt | 1 | https://amzn.to/3GDhP6a |
| M3 x 8mm Bolt | 6 | https://amzn.to/3EY5RU4 |
| M4 x 40mm Bolt | 1 | https://amzn.to/3Z7gU3Y |
| M4 x 30mm Bolt | 4 | https://amzn.to/42Lbluv |
Reviews
There are no reviews yet.