1 Compression Spring 0.8 x 12 x 305 (Recoil/Mag spring) 
Hammer Spring
5.5 inch Chaszel Barrel liner 
m3 bolts – 7 bolts
1 cut to 37.5mm (used on the barrel)
1 cut to 32mm (used to hold sear and grip in place)
1 cut to 28.5mm (used to hold trigger in place)
1 cut to 30.5mm cut off the end with the head on this one, it needs to just be a 30.5mm threaded rod (used to reinforce hammer bar)
1 cut to 25mm (Help holds the grip in place)
1 Cut to 30~mm (Helps hold bolt in place)
1 cut to 25mm (mag catch)

Firing pins (m3 70mm)

1 small Hair clip (sear spring)

2 Trigger springs